近五年已发表的代表性论著 |
[1] 宋远明*, 钱觉时, 刘景相, 王波, 王志娟. SO3对固硫灰渣胶凝系统水化及性能的影响[J]. 建筑材料学报, 2013, 16(4): 688-693. (EI收录) [2] SONG Yuanming*, QIAN Jueshi, Liu Jingxiang, WANG Bo, Wei Yingchun. Effect of Curing Conditions on the Hydration and Performance of CFBC Ash Cementitious System[J]. Journal of wuhan university of technology-materials science edition, 2014, 29(1): 93-96. (SCI收录) [3] SONG Yuanming*, QIAN Jueshi, LIU Yiquan, WANG Bo. Adsorption mechanism of polycarboxylate-based superplasticizer in CFBC ash-Portland cement paste[J]. Journal of wuhan university of technology-materials science edition , 2014, 29(5): 1-5. (SCI收录) [4] SONG Yuanming*, GUO Chuanchuan, QIAN Jueshi, WANG Zhijuan, WANG Zhi. Effect of autoclave curing on hydration of anhydrite in CFBC fly ash[J]. Magazine of concrete research, 2015, 67(1): 1-8. (SCI收录) [5] SONG Yuanming*, LI Baoling, YANG En-hua*, LIU Yiquan, DING Tian. Feasibility study on utilization of municipal solid waste incineration bottom ash as aerating agent for the production of autoclaved aerated concrete[J]. Cement and Concrete Composites, 2015, 56(1): 51-58. (SCI收录) [6] SONG Yuanming*, Guo Chuanchuan, QIAN Jueshi, DING Tian. Effect of the Ca-to-Si ratio on the properties of autoclaved aerated concrete containing coal fly ash from circulating fluidized bed combustion boiler [J]. Construction and building materials, 2015, 83: 136-142. (SCI收录) [7] 王志娟, 郭川川, 宋远明*, 王波, 徐恵忠. 碳硫硅钙石和钙矾石的稳定性[J]. 硅酸盐学报, 2016, 44(2): 292-298. (EI收录) [8] Zhijuan Wang, Yuanming Song*, Baoling Li. An Attempt to Reduce Materials Cost of Autoclaved Aerated Concrete Production[J]. The Open Civil Engineering Journal, 2016, 10(1): 323-333.(EI收录) [9] Yuanming Song, Baoling Li, En-Hua Yang*, Yiquan Liu, and Zhitao Chen. Gas Generation from Incinerator Bottom Ash: Potential Aerating Agent for Lightweight Concrete Production[J]. Journal of Materials in Civil Engineering, 2016, 28(7):1-8.(SCI收录) [10] Song Yuanming, Wang Zhijuan, Qian Jueshi*, Guo Chuanchuan. Mechanism of Thaumasite Formation in Concrete[J]. Journal of wuhan university of technology-materials science edition, 2017, 32(4): 893-897. (SCI收录) |